BACK TO CATEGORIES

CONTROL ACCESSORIES & LEVEL PROBES

type 82p Pneumatic Pressure Controller

TYPE 82P PNEUMATIC PRESSURE CONTROLLER

The 80 series indicator is suitable for pressure control. The instrument measure the value directly, displays the operating value and compares the measured variable with the set point. The comparison between the two values makes a modulating standard signal of 3-15 psi (0.2-1 bar) or 6-18 psi (0,4-
1,2 bar), sent to the final control device. (pneumatic control valve for example). Three types of control shapes available: ON-OFF,P and P+I

MATERIALS

Body and cover
Die cast aluminium anti-corrosive painted

IP RATING

IP54

CONNECTIONS

1/4" NPT with fittings for 4x6 mm pipe size

AIR SUPPLY

20 +/- 1.5 psi / 1,4 +/- 0,1 bar
35 +/- 1.5 psi / 2,4 +/- 0.1 bar

OUTPUT

3-15 psi / 0.2 1 bar 6-18 psi / 0,4-1,2 bar
6-30 psi / 0.5 2 bar (on request)

MA. AIR SUPPLY

Air supply 20 psi / 1.4 bar 2.6 Nm3/h

TRPT1 Temperature Sensors

TRPT1 TEMPERATURE SENSORS

The TRPT1 Pt100 resistance temperature sensors are specially designed for general industrial use. The sensing element is an RTD three wire device according to EN 60751 Class A. The sensor consists of a probe, a connection head and a measurement insert. The supply lines to the measurement insert are insulated from each other and from the probe tube with a ceramic insulator. The sensor can be connected directly to a temperature indicator or controller that has a three-wire Pt100 input.

SIZE & CONNECTIONS

Male threaded ISO 7 R 1/2''

OUTPUT

3-wire RTD or 4 to 20 mA (2-wire)

IP RATING

IP 66 (KNE enclosure)

PCS1 Pressure Transmitter

PCS1 PRESSURE TRANSMITTER

The PCS1 series pressure transmitters are suitable for all industrial applications, especially in severe conditions where high temperatures, pressure peaks and high levels of shock and vibration are present. They are extremely robust and reliable, thanks to their state of the art SMD electronics and compact all stainless steel construction.

SIZE & CONNECTIONS

Male threaded
ISO 228 G 1/4''

PRESSURE RANGES

0 to 6 / 0 to 10 / 0 to 16
0 to 25 / 0 to 40 / 0 to 100
0 to 250 / 0 to 400 / 0 to 600

ACCURACY

< 0,5% FS

REPSONSE TIME

< 0,5% FS

OUTPUT

4 to 20 mA (2-wire)

IP RATING

IP 65 / IP 67

UC820 Universal Process Controller

UC820 UNIVERSAL PROCESS CONTROLLER

The UC-820 is a digital universal controller used in the automation of industrial processes. It is ideally suited for use with our range of instrumentation, electric and pneumatic control valves and other electrical equipment. The controller includes a set of universal type inputs for RTD, thermocouple (TC), logic (binary) and analog inputs. The controller has options for a relay, open-collector (OC) and analog outputs using the innovative SMART PID algorithm.

SUPPLY VOLTAGES

20 to 40 V AC/DC
85 to 253 V AC/DC

DIMENSIONS

101 x 48 x 96 mm

IP RATING

IP 65

COMMUNICATION PROTOCOL

MODBUS RTU

UD-720 Universal Display

UD-720 UNIVERSAL DISPLAY

The UD-720 is a programmable digital panel display used for the measurement of standard sensor and analog signals applied in automation. It is ideally suited for use with our range of instrumentation such as pressure transmitters, temperature probes and TDS controllers.

SUPPLY VOLTAGES

24 V AC/DC
85 to 253 V AC/DC

DIMENSIONS

93 x 96 x 48 mm

IP RATING

IP 65

COMMUNICATION PROTCOL

MODBUS RTU

Series 395

SERIES 395

Single Electrode Holder

MATERIAL

Probe body - stainless steel - ANSI 303

THREAD

1/3 " GAS

TEMPERATURE

250 C on the electrode

PRESSURE

25 bar

IP RATING

IP40 with protection (option)

Series 203

SERIES 203

DIN Rail Conductivity Level Switch

IP RATING

IP 30

SENSITIVITY

standard 10μS - 10.000μS
on request 1μS - 20μS
on request 0,3μS - 2μS

POWER SUPPLY

24 or 110 or 230 V a.c.

FREQUENCY

50 60 Hz

ABSORPTION

5 VA

Series 800

SERIES 800

Safety probe

MATERIAL

Probe body - stainless ssteel

THREAD

1/2" gas and 3/4" gas

RATING

IP 65

Series 210

SERIES 210

Electronic self testing conductivity level alarm and block for minimum level

Series 211

SERIES 211

Electronic self testing conductivity level alarm and block for maximum level

Series 451

SERIES 451

Continuous level transmitter for high temperatures.
3 wire configuration

MATERIAL

Probe body - Stainless steel AISI 303

THREAD

1/2 " GAS

PRESSURE

20 bar

TEMPERATURE

250 C on the electrode

SPS-33

SPS-33

The ADCATROL SPS-33 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.

SIZE & CONNECTIONS

Male threaded ISO 7 R
1/2 "

MAX. OPERATING PRESSURE

32 bar

MAX.OPERATING TEMPERATURE

239 C

IP RATING

IP 65

SPS-21

SPS-21

The ADCATROL SPS-21 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.

SIZES & CONNECTIONS

Male threaded ISO 7 R 1/2''

MAX. OPERATING PRESSURE

32 bar

MAX. OPERATING TEMPERATURE

239 C

IP RATING

IP 65

BCS-211

BCS-211

The ADCATROL BCS-211 controller is part of the dissolved solids (TDS) control system used in steam boilers. This system is composed of a SPS series conductivity probe, a BCS-211 controller, a VPC series blowdown valve and, in case of need, a UC-820 universal process controller for PID control.

SUPPLY VOLTAGES

230 V AC +/- 15%,
50/60 Hz

DIMENSIONS

106 x 51 x 112 mm

IP RATING

IP 40

CONDUCTIVITY RANGE

BCS-211 0 to 10000 S/cm
BCS-211B 0 to 1000 S/cm

SV32

SV32

3/2 way solenoid valves are available as single station units and they are designed for use with compressed air, mainly applied where on/ off control is required with pneumatic actuators.

MATERIAL

Alluminium alloy

SIZES & CONNECTIONS

Female threaded
ISO 7 Rp 1/4''

MAX. OPERATING PRESSURE

8 bar

SUPPLY VOLTAGES

220 V AC
110 V AC
24 V DC
24 V AC

IP RATING

IP 65

P10

P10

The P10 air filter regulators are used to remove both solid and liquid impurities from the air and to regulate the output pressure to the required value for general purpose pneumatic systems. The filter bowl is transparent, allowing easy monitoring of the condensate level.

MATERIAL

Aluminium and polycarbonate

SIZES & CONNECTIONS

Female threaded
ISO 7 Rp 1/4"

PC25

PC25

An instrument that converts a standard DC signal to a standard pneumatic signal, for the change-over from electrical controllers to pneumatic control valves, or from electrical measuring system to pneumatic controllers. The PC25 is a force balance device, which converts a 4...20 mA input signal into a proportional 3...15 psi (0,2...1 bar) or 6...18 psi (0,4...1,2 bar) output signal, with a respective supply pressure of 1,7 5 bar.