BACK TO CATEGORIES
STEAM TRAPS
One of the equipment’s most often neglected in a steam installation is the steam trap. This happens because in most cases it fails open and, although leading to extra costs, the process is not interrupted. In some cases the lack of efficiency is due to improper application, often triggered by forced selection of a certain model, for economic reasons, bad advice or even limitation within the selected brand.
An efficient steam trap defines the frontier between steam and condensed liquid and allows, if selected wisely, the proper functioning of the installation and better energy management. We provide a complete range of steam traps using different materials, from DN15 to DN 150, designed for pressure up to 80 bar and flow rates of over 100,000 Kgs/h.
THERMODYNAMIC
DT40/2
The thermodynamic DT40/2 disc steam traps are compact and lightweight-easy to install traps, excellent for high-pressure systems, including steam tracing applications. The insulation cover ensures consistent operation and makes it particularly suitable for those applications where the weather conditions may affect the normal operation. These traps have only one moving part and offer a wide operating range, without adjustment.
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
MAX. OPERATING PRESSURE
40 bar
MAX. OPERATING TEMPERATURE
300 ºC
FLOW RATE CAPACITY
Up to 740 kg/h
DT42/2
The thermodynamic DT42/2 disc steam traps are compact and lightweight-easy to install traps, excellent for high-pressure systems, including steam tracing applications. These traps have only one moving part and offer a wide operating range, without adjustment.
SIZES
1/2” to 1”
DN 15 to DN 25
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN PN 40 or PN 63
Flanged ASME Class 150 or 300
Socket weld (SW) ASME B16.11
MAX. OPERATING PRESSURE
42 bar
MAX. OPERATING TEMPERATURE
300 ºC
DT46
Thermodynamic DT46 disc steam traps are compact and lightweight-easy to install traps, excellent for high-pressure systems, including steam tracing applications. The insulation cover ensures consistent operation and makes it particularly suitable for those applications where the weather conditions may affect the normal operation. These traps have only one moving part and offer a wide operating range, without adjustment.
SIZES
1/2'' to 1'' – DN 15 to DN 25
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN PN 40 or PN 63
Flanged ASME Class 150 or 300
Socket weld (SW) ASME B16.11
MAX. OPERATING PRESSURE
46 bar
MAX. OPERATING TEMPERATURE
400 ºC
FLOW RATE CAPACITY
Up to 800 kg/h
FLOAT AND THERMOSTATIC
FLT17LC
The FLT17LC float and thermostatic (integral air vent) steam trap series are designed for all types of low and high-pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage is essential.
SIZES
1/2” to 3/4” – DN 15 to DN 20
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN
Flanged ASME Class 150 16
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 495 kg/h
FLT17 | DN15 TO DN25
FLT17 line of float and thermostatic steam traps manufactured in SG iron and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 630 kg/h
FLT17 | DN25 HC
FLT17 line of float and thermostatic steam traps manufactured in SG iron and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 2400 kg/h
FLT17 | DN40 TO DN50
FLT17 line of float and thermostatic steam traps manufactured in SG iron and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
SIZE
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 7300 kg/h
FLT17 | DN50 HC
FLT17 line of float and thermostatic steam traps manufactured in SG iron and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 22500 kg/h
FLT29TW
The FLT29TW is a range of high capacity float and thermostatic
steam traps with integral air vent designed for modulating discharge
of condensate, ensuring maximum system heat transfer.
Typical applications include unit heaters, heat exchangers, dryers,
jacketed vessels and other applications where continuous discharge
is essential and high flow capacities are involved.
SIZES
3” to 4” – DN 80 to DN 100
CONNECTIONS
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 45000 kg/h
FLT32| DN15 TO DN25
Carbon steel FLT line of float and thermostatic steam traps manufactured in carbon steel and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
SIZES
1/2'' to 1'' - DN 15 to 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 630 kg/h
FLT32 | DN25 HC
Carbon steel FLT line of float and thermostatic steam traps manufactured in carbon steel and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 2400 kg/h
FLT32 | DN40 TO DN50
Carbon steel FLT line of float and thermostatic steam traps manufactured in carbon steel and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
SIZES
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 7300 kg/h
FLT32 | DN50 HC
Carbon steel FLT line of float and thermostatic steam traps manufactured in carbon steel and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
CONNECTIONS
Flanged EN PN 40
Flanged ASME Class 150 or 300
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 22500 kg/h
FLT39TW
The FLT39TW is a range of high capacity float and thermostatic
steam traps with integral air vent designed for modulating discharge
of condensate, ensuring maximum system heat transfer.
Typical applications include unit heaters, heat exchangers, dryers,
jacketed vessels and other applications where continuous discharge
is essential and high flow capacities are involved.
SIZES
3” to 4” – DN 80 to DN 100
CONNECTIONS
Flanged EN 1092-1 PN 16 or PN 40
Flanged ASME B16.5 Class 150 or 300
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 45000 kg/h
FLT14I | DN15 TO DN20
Stainless steel FLT14 line of float and thermostatic steam traps manufactured in stainless steel and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
SIZES
1/2” to 3/4” – DN 15 to DN 20
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLW RATE CAPACITY
Up to 495 kg/h
FLT14I | DN25
The FLT14I float and thermostatic (integral air vent) steam traps
series are designed for all types of low and high pressure steam
heating and process equipment.
Typical applications include unit heaters, heat exchangers, driers,
jacketed vessels and all the applications where continuous drainage
is essential.
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 630 kg/h
FLT14I | DN25 HC
Stainless steel FLT14 line of float and thermostatic steam traps manufactured in stainless steel and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 2400 kg/h
FLT14I | DN40 TO DN50
Stainless steel FLT14 line of float and thermostatic steam traps manufactured in stainless steel and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates and pressure drops, in various sizes, with different connections and multiple options to choose from.
SIZES
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198 ºC
FLW RATE CAPACITY
Up to 7300 kg/h
FLT49TW
The FLT49TW is a range of high capacity float and thermostatic
steam traps with integral air vent designed for modulating discharge
of condensate, ensuring maximum system heat transfer.
Typical applications include unit heaters, heat exchangers, dryers,
jacketed vessels and other applications where continuous discharge
is essential and high flow capacities are involved.
SIZES
3” to 4” – DN 80 to DN 100
CONNECTIONS
Flanged EN 1092-1 PN 16 or PN 40
Flanged ASME B16.5 Class 150 or 300
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 45000 kg/h
FLT22
The FLT22 float and thermostatic (integral air vent) steam trap series are designed for all types of low and high-pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage is essential.
MATERIAL
Carbon steel or stainless steel
SIZES
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 16 or PN 40
Flanged ASME Class 150 or 300
MAX. OPERATING PRESSURE
21 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLT50S | FLT65S
The FLT50S / 65S float and thermostatic steam traps series (with integral air vent) are designed for all types of low and high-pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage is essential.
SIZES
FLT50S – DN 50 to DN 65
FLT65S – DN 65 to DN 100
CONNECTIONS
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
12 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 50000 kg/h
FLT151
The FLT151S series of float and thermostatic steam traps with integral air vent is designed for modulating discharge of condensate, ensuring maximum system heat transfer. Specially designed for applications where continuous drainage is essential and extremely high loads are involved, such as those found in sugar and alcohol refineries.
SIZES
4" to 6" - DN 100 to DN 150
CONNECTIONS
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
MAX. OPERATING PRESSURE
12 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 50000 kg/h
INVERTED BUCKET
IB12
The IB12 series inverted bucket steam traps are recommended for applications where the most important requirements are overall operating efficiency and long, trouble-free service life. They operate intermittently, either wide open or tightly closed and are, therefore, best suited for medium and high steam pressure applications.
CONNECTIONS
Threaded ISO 7 Rp or NPT
MAX. OPERATING PRESSURE
14 bar
MAX.OPERATING TEMPERATURE
198 ºC
FLOW RATE CAPACITY
Up to 500 kg/h
IBB12
The IBB12 series inverted bucket steam traps are recommended for applications where the most important requirements are overall operating efficiency and long, trouble-free service life. They operate intermittently, either wide open or tightly closed and are, therefore, best suited for medium and high steam pressure applications
CONNECTIONS
Threaded ISO 7 Rp or NPT
MAX. OPERATING PRESSURE
14 bar
MAX. OPERATING TEMPERATURE
198ºC
FLOW RATE CAPACITY
Up to 1670 kg/h
IB30S | DN15 - DN25
The IB30 series inverted bucket steam traps are recommended for applications where the most important requirements are overall operating efficiency and long, trouble-free service life. They operate intermittently, either wide open or tightly closed and are, therefore, best suited for medium and high steam pressure applications.
MATERIAL
Completely in stainless steel or
Carbon steel body with stainless steel cover
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
27 bar
MAX. OPERATING TEMPERATURE
380ºC
FLOW RATE CAPACITY
Up to 530 kg/h
IB30S | DN40 - DN50
The IB30 series inverted bucket steam traps are recommended for applications where the most important requirements are overall operating efficiency and long, trouble-free service life. They operate intermittently, either wide open or tightly closed and are, therefore, best suited for medium and high steam pressure applications.
SIZES
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 25
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
17 bar
MAX. OPERATING TEMPERATURE
220 ºC
FLOW RATE CAPACITY
Up to 530 kg/h
IB35
The IB35 series inverted bucket steam traps are recommended for applications where the most important requirements are overall operating efficiency and long, trouble-free service life. They operate intermittently, either wide open or tightly closed and are, therefore, best suited for medium and high steam pressure applications.
MATERIAL
Completely in stainless steel or
Carbon steel body with stainless steel cover
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
27 bar
MAX. OPERATING TEMPERATURE
380 ºC
FLOW RATE CAPACITY
Up to 400 kg/h
THERMOSTATIC
TH13A
The TH13A series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment and especially as air eliminator.
CONNECTIONS
Threaded ISO 7 Rp or NPT
MAX.OPERATING PRESSURE
13 bar
MAX. OPERATING TEMPERATURE
200 ºC
FLOW RATE CAPACITY
Up to 360 kg/h
TSS22
The TSS22 all stainless steel thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment.
CONNECTIONS
Threaded ISO 7 Rp or NPT
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 795 kg/h
TH21
The TH21 series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 25
Flanged ASME Class 150
Socket weld (SW) ASME 16.11
MAX.OPERATING PRESSURE
21 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 775 kg/h
TH21SS
The TH21SS series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
MAX. OPERATING PRESSURE
21 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 1590 kg/h
TH32Y | TH32YCK
The TH32Y series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
SIZES
1/2” to 1” – DN 15 to DN 25
CONECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 795 kg/h
TH35/2 | TH35/3
The TH35 series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 2385 kg/h
TH36
The TH36 series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment where high discharge capacities are required.
SIZES
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME 16.25
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 4770 kg/h
TSW22
The TSW22 all stainless steel thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment.
MATERIAL
Stainless Steel Wafer Design
CONNECTIONS
Sandwiched between flanges
as per EN 1092-1 PN 16 or PN 40
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 795 kg/h
BIMETALLIC
BM20
BM20 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
17 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 1850 kg/h
BM20R
The BM20R series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
17 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 1840 kg/h
BM20SS
The BM20SS series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
17 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 1850 kg/h
BM24 | DN15 - DN25
BM24 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
24 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 2680 kg/h
BM24 | DN40 - DN50
BM24 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
24 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 9000 kg/h
BM32 | DN15 - DN25
BM32 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2” to 1”; DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
300 ºC
FLOW RATE CAPACITY
Up to 2900 kg/h
BM32 | DN40 - DN50
BM32 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
11/2” to 2” – DN 40 to DN 50
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME 16.25
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
300 ºC
FLOW RATE CAPACITY
Up to 3500 kg/h
BM35
BM35 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2" to 1" - DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40 or PN 63
Flanged ASME Class 300 or 600
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME 16.25
MAX. OPERATING PRESSURE
35 bar
FLOW RATE CAPACITY
Up to 4200 kg/h
BM45
BM45 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2" to 1" - DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 63
Flanged ASME Class 300 or 600
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME 16.25
MAX. OPERATING PRESSURE
45 bar
BM80
BM80 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2" to 1" - DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 160
Flanged ASME Class 900
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME 16.25
MAX. OPERATING PRESSURE
80 bar
FLOW RATE CAPACITY
Up to 6200 kg/h
BM140
BM140 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded BSP or NPT
Flanged EN or ASME
Socket weld (SW) ASME
Butt weld (BW) ASME
MAX. OPERATING PRESSURE
25 to 140 bar
FLOW RATE CAPACITY
Up to 8500 kg/h
BSS20
BSS20 all stainless steel bimetallic steam traps and air eliminators are simple and robust traps, especially suited for instrument tracing, line tracing applications and where condensate sensible heat can be recovered. It is especially recommended as an air eliminator. The use of condensate sensible heat reduces steam consumption.
CONNECTIONS
Threaded ISO 7 Rp or NPT
MAX. OPERATING PRESSURE
20 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 1120 kg/h
BM-HC
The BM–HC series bimetallic steam traps and air eliminators are simple and robust traps, recommended for large process applications. They can be supplied with several bimetallic regulators achieving the requested flow rate.
SIZES
11/2” to 5” – DN 40 to DN 125
CONNECTIONS
Flanged EN 1092-1 PN 63
Flanged ASME B16.5 Class 900
Others on request
MAX. OPERATING PRESSURE
63 bar
MAX. OPERATING TEMPERATURE
300 ºC
UNIVERSAL STEAM TRAPS & CONNECTORS
UCX41 | PIPELINE CONNECTOR
The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired. Typical installations are drip service on steam lines, tracing applications and small process equipment. The two-bolt flange connector allows for fast trap replacement without disturbing the pipelines. The UCX connector fits the universal swivel connection steam traps.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp
MAX. ALLOWABLE PRESSURE
47.8 bar
MAX. RELATED TEMPERATURE
400 ºC
CTS4U | COMPACT TRAPPING STATION
The CTS4U is designed as a complete and compact steam trap station, to be used in steam systems where a simplified and economic maintenance program is desired. It has been designed to replace the traditional multi-component trap station systems. Typical installations are drip service on steam lines, tracing and small process equipment. Two-bolt flange connector permits trap replacement in minutes without disturbing the piping. The CTS4U trapping station fits all universal swivel connector steam traps.
SIZES
1/2” to 1” – DN 15 to DN 25
CONNECTIONS
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150
MAX. OPERATING PRESSURE
17,5 bar
MAX. OPERATING TEMPERAURE
230ºC at 10 bar
UDT46 | THERMODYNAMIC STEAM TRAP
The UDT46 series thermodynamic steam traps are excellent for high-pressure systems, including steam tracing applications. The insulation cover ensures consistent operation and makes them particularly suitable for applications where the weather conditions may affect the normal operation. These traps have only one moving part and offer a wide operating range, without adjustment.
SIZES
According to the connector
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
245 ºC
FLOW RATE CAPACITY
Up to 695 kg/h
UFS32 | FLOAT & THERMOSTATIC STEAM TRAP
The UFS32 series float and thermostatic (integral air vent) steam traps are maintenance-free and sealed. They are specifically designed to work with low and medium pressure steam and all types of heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels, and all the applications where continuous drainage is essential.
SIZES
According to the connector
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
245 ºC
FLOW RATE CAPACITY
Up to 630 kg/h
UTS22 | THERMOSTATIC STEAM TRAP
The UTS22 series thermostatic steam traps and air eliminators, completely in stainless steel, are maintenance-free and sealed traps. They are specifically designed to be used on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. These traps fit the UCX universal connectors and CTS4U compact stations.
SIZES
According to the connector
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
795 kg/h
UBS20 | BIMETALLIC STEAM TRAP
The UBS20 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance-free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered. These traps fit the UCX universal connectors and CTS4U compact stations.
SIZES
According to the connector
MAX. OPERATING PRESSURE
17 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 1850 kg/h
UCX90 | 4 BOLT PIPELINE CONNECTOR
The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired.
Typical installations are drip service on steam lines, tracing applications and small process equipment. The four-bolt flange connector allows for fast trap replacement without disturbing the pipelines. The UCX connector fits the universal four-bolt swivel connection steam traps.
SIZES
1/2” to 1”; DN 15 to DN 25
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 100
Flanged ASME B16.5 Class 600
Socket weld (SW) ASME B16.11
UBS90 | 4 BOLT BIMETALLIC STEAM TRAP
The UBS90 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered. These traps fit the UCX90 four bolt universal connectors.
SIZES
1/2” to 1”; DN 15 to DN 25
FLOW RATE CAPACITY
Up to 5400 kg/h
COMPLIMENTARY EQUIPMENT
CDV32
The CDV32 condensate drain valve automatically discharges air and condensate from steam systems during start-up. A compression spring keeps the valve open when the system is not pressurized. As soon as the operating pressure reaches the closing pressure to which the CDV is set, the valve closes. If the operating pressure drops below the closing set pressure, the spring force will cause the CDV32 to open once again.
SIZES
1/2” to 3/4”; DN 15 to DN 20
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 780 kg/h
VB21M
The VB21 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
CONNECTIONS
System: vertical connection 1/2”.
Air inlet: horizontal connection 1/8”.
VB21 – female threaded ISO 7 Rp.
VB21M – male threaded ISO 228 G.
LIMITING CONDITIONS
13 bar at 400 ºC.
21 bar at 220 ºC.
DF
The ADCA DF series are compact noise diffusers designed to disperse the high-speed discharge from steam or air traps, dampening the noise levels and reducing erosion. These devices are typically installed downstream of intermittent steam traps, such as thermodynamic or inverted bucket, which are generally associated with high-speed blast discharges. Noise reductions greater than 80% can be expected when measured at 1 meter away from the source.
CONNECTIONS
Threaded ISO 7 Rp
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
BDV | AFZ | HVV
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.
BDV – Blowdown valves – Manual discharge of strainer screen contents and generally to be used as a drain and/or depressurization valve.
CONNECTIONS
NPT-M
Threaded ISO 228 G
Metric fine pitch
MAX. OPERATING PRESSURE
42 bar
MAX. OPERATING TEMPERATURE
400 ºC
UTT100
The UTT – Ultrasonic Trap Tester is a battery-powered instrument that gives a visible and audible indication of ultrasonic frequencies. It provides easy, accurate leak detection and mechanical inspection through advanced ultrasonic technology. Before you begin testing, it is advisable to familiarize yourself with the basic components of your kit.